Do you know what are the precautions for installing and using the sealing ring?

Precautions for installation and use of seals:
​​
(1) Don't put it in the wrong place and ruin your mouth. Suppose there are more than 50 on the mouth. μm scars are likely to cause significant oil leakage.
​​
(2) Prevent forced installation. Instead of a hammer, use a tool to press the seal into the seat hole, then hold the mouth according to the splines. Before assembling, apply some grease to your lips to prevent burns when the actual operation begins. Pay attention to cleanliness.
Manufacturer of sealing rings
​​
(3) Prevent the expiration of the use period. The service life of plastic seals is generally 30,000 to 50,000 hours, and new sealing rings should be replaced immediately.
​​
(4) The specifications of the disassembled sealing ring should be the same. Strictly abide by the stipulations in the instructions for use, and choose the same specification of the sealing ring, otherwise the shrinkage cannot be guaranteed.
​​
(5) Avoid using old sealing rings. When using a new sealing ring, carefully check its surface quality when using it, and make sure that there are no holes, bumps, cracks, grooves and other defects, and it has sufficient ductility.
​​
(6) During assembly, all parts should be cleaned strictly, and common tools should be used to prevent the sharp edges of metal materials from scratching fingers.
​​
(7) When replacing the sealing ring, the pipe groove of the sealing ring should be strictly inspected, the dirt should be removed, and the bottom end of the pipe groove should be polished.
​​
(8) In order to prevent damage caused by oil leakage, it must be operated according to regulations. At the same time, the equipment cannot be overweight or work in extreme environments for long periods of time.

https://www.hnjcrb.com/